Performing the removal requirements.

The first thing we have to do is make sure that your old one is not jammed. Each comes with a twist removal, if you can not find yours, they are available in computer stores, such as Home DEPOT. There's usually on the bottom of the circuit breaker to the disposal of a pick up at your disposal / disposer is broken simply because it stops working. You should check inside, nothing that could be lodged in the openings of the drum.Lets start removing the old disposal / disposer. Clear everything from under the sink. Some of the installation of the power cord plugged into a wall outlet and some are just wired.

The other thing that you need to do, that stops the power. If the unit is plugged into the wall just unplug it from the wall. If it is wired directly to the power you will need to close Off the breaker box. When you have the power off, remove the bottom panel disposal / disposer, single SCREW small panel next to where the wire to the ground screw Remove the 2 - WIRE Connectors (Note E colors and locations). Remove all hoses and pipes for disposal / disposer, which is usually 2 connections, one for the dishwasher and 1 seed.Now that you have your new garbage disposal / disposer allows you to complete. Lets get together to remove the sink flange, loosen 3 mounting bolts, sufficient to reach the level of the lower mounting ring, slide the bottom mounting ring and pry off the retainer ring with SCREW driver Slide the mounting ring off the bottom, and push down until the edge of the sink. Cleanse Off all stucco and / or caulking the sink.


Click here to visit our http://www.ottawajunkremoval.org/ for more details